User manual Eureka FloorRover Dash NEU526C (English (2025)

Your Eureka vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged

A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.

A commonly used method is to put a little washing powder in the dust container or the dust bag.

For allergy sufferers, vacuuming the house at least twice a week is recommended.

The Eureka FloorRover Dash NEU526C vacuum cleaner comes with several accessories included in the carton. Here are the steps to identify these accessories:1. Open the carton of the Eureka FloorRover Dash NEU526C vacuum cleaner.2. Inside the carton, you will find a multi-angle adaptor, a belt, and various brushes such as a dusting brush, a 7" crevice tool, and a 9.5" crevice tool.3. Additionally, the carton includes a pet turbo brush, a washable pre-motor filter, and a HEPA filter.4. To ensure you have genuine Eureka accessories and replacement parts, you can visit the website www.eureka.com or call 1-800-282-2886.5. For maintenance instructions on the filters, refer to pages 10 and 11 of the manual.6. The manual also provides a visual guide to help you identify the different parts of the vacuum cleaner, such as the dust cup, brushroll, filter screen, handle, exhaust grill, and power cord.By following these steps, you can easily identify the accessories included in the carton of the Eureka FloorRover Dash NEU526C vacuum cleaner.

To properly attach the hose and handle of the Eureka FloorRover Dash NEU526C vacuum cleaner, follow these steps:1. Place the vacuum cleaner in an upright position and ensure that it is turned off.2. Turn the hose end counterclockwise to unlock it. Pull up on the hose end to release it.3. To prevent the vacuum from tipping over while using accessories, insert the hose clip into the opening on the back of the vacuum and press it in to snap it into place.4. Adjust the suction power by using the slide on the hose end.5. If you are using accessories with the hose only, push the desired tool directly onto the end of the hose.6. If you are using accessories with the handle as an extension wand, push the end of the hose into the top of the handle and twist it clockwise to lock it into position. On the NEU526 model, open the cap first.7. Push the handle release latch and pull out the handle/extension wand.8. Push the desired tool onto the end of the extension wand.9. When you are finished using the accessories, twist the hose counterclockwise and pull it off the handle. Slide the handle into the top of the vacuum cleaner and push it down until it clicks.10. Squeeze the sides of the hose clip to release it from the back of the vacuum. Reposition the hose over the retainer and push the loose end securely into the hose inlet.11. Store the tools on the vacuum cleaner and wrap the cord.By following these steps, you should be able to properly attach the hose and handle of the Eureka FloorRover Dash NEU526C vacuum cleaner.

When using the Eureka FloorRover Dash NEU526C vacuum cleaner, it is important to follow these safety precautions:1. Read all instructions before using the vacuum cleaner to ensure proper usage.2. Do not use the vacuum cleaner outdoors or on wet surfaces to avoid the risk of electric shock.3. Always turn off the switch and unplug the electrical cord when the vacuum cleaner is not in use and before servicing.4. Keep the vacuum cleaner out of reach of children and do not allow it to be used as a toy.5. Use the vacuum cleaner only as described in the manual and with the manufacturer's recommended attachments.6. Do not use the vacuum cleaner if the cord or plug is damaged. If the vacuum cleaner is not working properly or has been dropped or damaged, return it to an authorized service center before using.7. Avoid pulling or carrying the vacuum cleaner by the cord and do not use the cord as a handle. Also, do not run the vacuum cleaner over the cord or close a door on the cord.8. Keep the vacuum cleaner away from heated surfaces and do not use extension cords or outlets with inadequate current carrying capacity.9. Always turn off all controls before unplugging the vacuum cleaner and unplug it by grasping the plug, not the cord.10. Avoid handling the plug or vacuum cleaner with wet hands and do not put any objects into the openings or use the vacuum cleaner with blocked openings.11. Keep hair, loose clothing, fingers, and all body parts away from the openings and moving parts of the vacuum cleaner.12. Take extra care when cleaning stairs and avoid placing the vacuum cleaner on furniture or stairs as the brushroll may cause damage.13. Do not use the vacuum cleaner to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.14. Always use the vacuum cleaner with the dust cup, filter, screen, and exhaust filter in place.15. Store the vacuum cleaner indoors in a cool, dry area and keep your work area well lit.16. Unplug electrical appliances before vacuuming them and unplug the vacuum cleaner before connecting the pet turbo brush.Remember to follow these safety precautions to ensure safe and effective use of the Eureka FloorRover Dash NEU526C vacuum cleaner.

Yes, the manual of the Eureka FloorRover Dash NEU526C is available in English .

No results